Click on the image to check the artwork
Introduction
Transparent insulation sleeve provides encapsulation, inspectability, strain relief and insulation. Two pre-fluxed solder rings provide controlled soldering process. One-piece design provides easy installation and lower installing cost. Color coded hot-melt rings on two ends of heat shrinkable tube provide precise selection of wire size. Main application is to connect two or more wires.
Feature and Advantage
Shrink ratio: 2:1
Waterproof for wiring splices
Transparent sleeve provides visual inspection
High elasticity assures steady performance
Easy control of soldering process
Operating temperature: -55℃～125℃
Minimum shrink temperature: 140℃
Specification
Product Code |
Size Code Color Item 3 |
L (mm) |
Qty Item 2 |
ΦA Min (mm) |
Wire Dimensions (mm) |
Cable Size |
||
ΦB Min |
ΦB Max |
ΦC Min |
||||||
HP-SST-205-01 |
White |
26 |
2 |
1.7 |
0.4 |
1.7 |
0.76 |
0.25-0.5mm2 |
HP-SST-205-02 |
Red |
30 |
2 |
2.7 |
1.3 |
2.7 |
1.2 |
0.5-1.5mm2 |
HP-SST-205-03 |
Blue |
35 |
2 |
4.5 |
1.8 |
4.5 |
2.0 |
1.5-2.5mm2 |
HP-SST-205-04 |
Yellow |
40 |
2 |
7.0 |
2.8 |
6.0 |
3.4 |
4-6mm2 |
http://www.raytechsh.com/